Most of the time, companies will spend lots of money to purchase their lift trucks. It is vital, therefore to take proper care of your machinery to protect your investment into the long run. It is really a great idea to know the procedures which are carried out in taking care of and maintaining this machine.
By starting up the forklift and listening carefully how it runs is one of the best ways to tell how good the engine is performing. For example, if there are any knocks or misses, the equipment is faulty and this must raise several concerns. Moreover listen carefully for any squealing noise that come from the belts since these sounds will provide you with a lot of information.
Some of the main components requiring attention during maintenance include the safety warning devices, gauges, horn, the lights and the overhead guard. Any faulty parts or burnt out light bulbs should be replaced as soon as they are noticed. It is also vital to inspect the wiring.
The battery compartment terminals should be cleaned when the above components have been checked thoroughly. If the terminals are not clean, be sure to clean them properly. Each cell of the battery should be checked in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change has been carried out and new filters have been fitted, visually inspect the drive axle from underneath the machine. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, inspect each and every other component of the machinery like the wheels. If any type of fault or problem is detected, be sure to address it immediately so as to make sure the machine is running at its safest and optimum levels.